Alain Bouched Leather Motorcycle Jackets

Coax Battery Connector

Protect Your Marine Electronics While Laying-Up or Stacked

For whatever reason, when the time comes, it helps to know how to protect your marine electronics while laying-up or stacking your boat.  Anyone who's been around electronics for any length of time knows that one of the most common statements following the discovery of an electronic problem is "it was working when I turned it off."  A large percentage of failures in electronics occur at the instant you power it on.  This can be attributed to a number of factors including exposure to moisture, abnormal voltages, static electricity, and extreme temperatures.  When vessels lay dormant for extended periods of time the incidents of electronic equipment failure appear to increase significantly.  However, there are steps and precautions that owners, operators, and technicians can take that may substantially reduce the potential of equipment failure that often accompany periods of non-use.

Before I get to the actual electronics it might be a good idea to touch on something else that directly ties into this subject.  The battery system needs to be considered when developing a plan for laying-up or stacking your boat.  If nothing is going to be operational (i.e. bilge pumps, fire systems...) during the down time then you should consider just disconnecting the batteries completely.  Either way, they should be fully charged before storage and not go more than several months without recharging.  The best practice is to recharge batteries before they drop below a 70% charge level.  Avoid extreme temperatures and prolonged exposure to moisture.  An uncharged lead acid battery that is allowed to freeze may be irreparably damaged.  Be sure to completely charge batteries before using them.  Firing up the generator and turning everything on while the batteries charge is a poor practice and could result in equipment damage.

In closed spaces on a boat that contain electronics, installing a dehumidifier is an excellent way to control condensation.  Not only will it help protect your electronics but will go a long way towards controlling corrosion on wiring and connectors.  In smaller spaces where installing a dehumidifier is not possible, using silica gel packs can substantially reduce the moisture.  Large gel packs are available that will effectively cover several hundred cubic feet.  Placing smaller packs inside radar scanners, satellite TV domes, and any other confined space that houses electronics is a very inexpensive way to assist you in controlling moisture.  As previously mentioned, eliminating 100% of moisture is impossible but applying every method and tool at your disposable should be of top priority.

Another area of concern is the potential of damage due to static electricity, including the worse kind, lightning.  Boats and everything protruding from them are magnets for static electricity and it doesn't take much to cause severe damage to your electronics.  There's absolutely nothing you can do to avoid damage if your boat, or anything on it sustains a direct, or even an indirect lightning strike.  However, reducing the amount of static accumulation on antennas will reduce the odds of a strike.  Even without lightning, simple static build-up on antennas and cables can potentially cause serious damage to electronic equipment.  Just as with moisture control, take an active role in the prevention of damage from static electricity and you'll be much better off for it. 

Longer VHF and SSB antennas that are configured in a lay-down fashion are better flat on the deck than standing up.  Be sure and properly secure them in their "lowered" position to keep them from being blown around by wind or disturbed by the rocking of your boat.  Disconnecting coax cables at the radio end will prevent any static electricity that does accumulate from passing into the equipment.  Labeling the cables is never a bad idea.  What's obvious today may not be so obvious a few months down the road.  Devising a method of grounding the cable shielding (outer conductor/braid) will provide a constant discharge path for any electricity that does find it's way to the cable.  For those of you who really like dotting I's and crossing T's, shorting the center conductor of the coax cable to the grounded shield would fall into that category.  Obtaining a connector that mates up with the one on the cable end can make the shorting and grounding process much easier.  Bonding all the electronics to the vessels common ground (the water) is also recommended.  It's not necessary in order for your equipment to work properly, but it does reduce the odds of static electricity build-up and can also serve to reduce paths for stray electrical currents that may promote electrolysis.  Metal hull vessels make this job real easy since almost everything is a good ground.  However, nonmetallic boats require considerable effort and attention when it comes to grounding.  Volumes have been written on this subject so that's where I'm going to leave it for now.

Excessive temperatures can be devastating to electronics.  Even though most quality marine electronic equipment manufactured today is designed to withstand the harsh environment, reasonable precautions still make sense.  Take steps to avoid exposing them to direct sunlight for prolonged periods of time.  Block windows and provide shading where needed.  If your equipment came with snap on plastic covers, use them.  Most of us have been around electronics long enough to understand how damaging heat and prolonged exposure to direct sunlight can be.  If you use common sense and do what you can to minimize exposure to extreme temperatures, your electronics (and your pocket book) will thank you for it.   

Once you are ready to reactivate your electronics after a prolonged down time there are a few things to consider.  It's best to stabilize the environment prior to turning the equipment on.  Don't fire up the air conditioning on a hot summer day or the heating in winter and immediately turn on the electronics that are in the same area.  That just promotes the condensation you've been trying to avoid.  Make sure the batteries are fully charged and visually inspect everything, including the antennas.  Once you do turn on the electronics, give some extra time to the radios and radar before you transmit.  If you disconnected the antenna cables but elected not to ground them, remember why you did it in the first place.  You were trying to keep static electricity out of your electronics so be sure and ground the end of the cable prior to reconnecting it to discharge any static electricity that may be on the line.

Although the primary purpose of this article is for when your boat is going to be out of service for an extended period of time, some of the practices and procedures given here can apply to the everyday operations, care, and maintenance of your electronics.  Not all failures can be avoided but with a better understanding of your equipment and the application of a few relatively simple procedures, you can go a long way toward extending the life of your electronics and saving a lot of money.  Smooth sailing.

About the Author

Dave has spent almost 40 years in the marine electronics industry as a technician, manager, and business owner. He earned a 1st Class FCC Radiotelephone License with Ship Radar Endorsement in 1972 and has received numerous accreditations from manufacturers, and trade associations.

DC Coax Battery Harness $8.99 Firstgear DC Coax Battery Harness DC harness with coax connector and waterproof fuse holder, 15 amp fuse.

Coax connector $29.99 Black Box - Coax connector - BNC (F) - coaxial

6 DC Coax Panel Mount Connector $15.99 Firstgear 6" DC Coax Panel Mount Connector DC Coax panel mount connector provides a flush mount power source Spring loaded cover and the 6" Coax plug cable soldered on for plugging to the output of the battery harness or Heat Troller It allows a direct connection to the DC Coax power plugs used in the Heat Troller Sold each

6in SAE Connection to DC Coax Plug Adapter $8.99 Firstgear 6in SAE Connection to DC Coax Plug Adapter Cable with 6 inches of 16 AWG wire and SAE connector For plugging a coax Heat-Troller™ to clothing using an SAE connector Can also be used to plug a battery tender into a portable Heat-Troller™ DC Coax battery harness

RG-59 COAX SPEED PLUG CONNECTOR $4.99 RG-59 coax speed plug connector. Solderless for RG-59 cable.

GOLD-PLATED F-56 TWIST ON COAX CABLE CONNECTOR $5.99 Gold-plated F-56 twist on coax cable connector.

Roadpro RPDF1 Coax Connector Ff So239 1pk $17.63 RoadPro RPDF1 Female to Female SO239 Coax Connector. SO239 Connector Ends for PL259 Connections. High quality components.

Right Angle Compression BNC Connector for Miniature Coax - video connector $13.99 C2G Right Angle Compression BNC Connector for Miniature Coax - Video connector - BNC (M) - chrome (pack of 10 )

Compression RCA Type Connector for Miniature Coax - video connector $7.99 C2G Compression RCA Type Connector for Miniature Coax - Video connector - RCA (M) - chrome (pack of 10 )

Right Angle Compression RCA Type Connector for Miniature Coax - video connector $29.99 C2G Right Angle Compression RCA Type Connector for Miniature Coax - Video connector - RCA (M) - chrome (pack of 10 )

IDEAL Mini-coax RCA Compression Connector $19.99 10 89-014SMRCA Easy to install one-piece design All brass connector provides excellent conductivity and is corrosion resistant Works on most 25AWG mini coax cable A/V Connector IDEAL IDEAL Industries, Inc Mini-coax RCA Compression Connector RCA RCA Male www.idealindustries.com

Cables To Go / Compression RCA Connector for Miniature Coax - 10pk / 40989 $15.1 Cables To Go - Compression RCA Connector for Miniature Coax - 10pk - 40989

Ideal Industries / IDEAL F and BNC Coax Connector Tool / 35-046 $34.62 Ideal Industries - IDEAL F and BNC Coax Connector Tool - 35-046

Jasco Products Right Angle Coax F Connector 73317 $22.19 Coax F connector. Right angle. Converts a straight coax connection to a right angle connection for tight spaces. Length: 0.46. Width: 4.63. Height: 3.48

Fluke Networks CIQ-COAX CableIQ Coax Adapter Kit $29.99 F-connector BNC Connector RCA Connector Fluke MicroScanner² Cable Verifier CIQ-COAX CIQ-COAX CableIQ Coax Adapter Kit CableIQ Fluke Networks Network Accessory Kit www.flukenetworks.com

RF CATV TV FM Antenna Coax Female Plug Connector $4.49 Description:Coax Plug Connector is designed for connecting to CATV, TV and FM that ensure more clear vision effect.This Coax Plug enables plug into a female plug.Antenna Coax Plug is easy to mount with cable, no need to solder, anyone can do.Length: 4.2cmWeight: 7.4gPackage included:1 x CATV Coax Plug

3.5mm Mono Plug to TV Coax Aerial Plug Connector Adapter $4.49 Description:3.5mm Mono Plug to TV Coax Aerial Plug Connector Adapter.Connectors: 3.5mm Mono Plug (Male) to TV Coax Plug (Male)This 3.5mm Plug to Coax Plug Adapter is constructed of plastic body with nickel plated contacts.The 3.5mm Mono Plug to Coax Plug Connector allows the use of an indoor/outdoor aerial on a portable TV with a 3.5mm Mono jack for improved picture quality.Precision-made 3.5mm Plug to Coax Plug Connector ensures long-lasting quality.Dimension: ~1.65"(L) x 0.5"(D)Weight: 5gPackage Included:1 x 3.5mm Mono Plug to TV Coax Plug Adapter

IDEAL F and BNC Coax Connector Tool $18.99 35-046 Works on hex style F and BNC connectors Makes attaching and detaching connectors to equipment easier Aides in installing CATV connectors BNC Installation/Removal BNC Installation/Removal Tool Comfortable Grip F and BNC Coax Connector Tool IDEAL IDEAL Industries, Inc www.idealindustries.com

Gens Ace 4mm Banana Battery Connector $1.99 4mm Banana Battery Connector

Velocity Mini-Coax - antenna cable - 1.5 ft $8.99 C2G Velocity Mini-Coax - Antenna cable - F connector (M) - F connector (M) - 1.5 ft - coaxial - blue

Cables To Go Right Angle Compression BNC-Type Connector for Miniature Coax $36.99 10 12 oz 40992 Nickel-plated brass NOTE: Simply prepare Cables To Go's 3 or 5 conductor miniature coax cable using the stripping tool (item #40998), insert the center pin and compress it with the 3-in-1 compression tool (item #38011) BNC Brass Cables To Go Chrome Right Angle Compression BNC-Type Connector for Miniature Coax Video Connector www.cablestogo.com

Cables To Go / Right Angle Compression BNC Connector for Miniature Coax - 10pk / 40992 $20.02 Cables To Go - Right Angle Compression BNC Connector for Miniature Coax - 10pk - 40992

Cables To Go / Right Angle Compression RCA Connector for Miniature Coax - 50pk / 40997 $28.28 Cables To Go - Right Angle Compression RCA Connector for Miniature Coax - 50pk - 40997

Shakespeare / Shakespeare PL-259-CP-G PL-259 Connector for RG-8X or RG-58/AU Coax. Gold Plated / PL-259-CP-G $19.08 Shakespeare - Shakespeare PL-259-CP-G PL-259 Connector for RG-8X or RG-58/AU Coax. Gold Plated - PL-259-CP-G

Shakespeare / Shakespeare PL-258-CP-G Gold Splice Connector For RG-8X or RG-58/AU Coax. / PL-258-CP-G $21.79 Shakespeare - Shakespeare PL-258-CP-G Gold Splice Connector For RG-8X or RG-58/AU Coax. - PL-258-CP-G

Cables To Go / Right Angle Compression RCA Connector for Miniature Coax - 10pk / 40995 $17.52 Cables To Go - Right Angle Compression RCA Connector for Miniature Coax - 10pk - 40995

Transceiver 10Base-5 (Coax) AUI 15pin D-Sub (AUI) Vampire Connector External $185 Transceiver 10Base-5 (Coax) AUI 15pin D-Sub (AUI) Vampire Connector External

RF Antenna CATV TV FM Cable Female Coax Plug Connector $4.49 Description:Plastic Female Coax Plug RF Antenna CATV TV / FM Cable ConnectorAntenna Coax Plug is designed for connecting to CATV TV/FM cable that enable you can plug into the CATV TV/FM Antenna Wall Jack, RF Signal Amplifier and Antenna Booster, etc.This Coax Plug enable you can plug into a Male plug / socket.Easy mounting with the cable, no need for soldering that anyone can do.Length: 4.0cmWeight: 7.4gPackage includes:1 x CATV Coax Plug

Truckspec TSPL258 Pl258 Dbl Female Coax Connector $17.6 SO239 Connector Ends for PL259 Connections. Huge selection to choose from. Ready to ship at your convenience. High quality components.

CCTV RG59 Coax Male BNC Twist On Connector Adapter $1.9 Description:CCTV RG59 Coax Male BNC Twist On Connector Adapter.Use this BNC Twist On Connector for RG59 cables.It is quicker and easier to use than crimp style.This BNC Connector is constructed of nickel-plated metal with gold plated contact.Precision-made BNC Adapter ensures long-lasting quality.Connector Type: BNC Twist on Male for RG59Dimension: ~1.4"(L) x 0.55"(D)Weight: 13gPackage Included:1 x BNC Twist On Adapter

Shakespeare PL-258-CP-G Gold Splice Connector For RG-8X Or RG-58/AU Coax. $16.5 Shakespeare Centerpin and reg; PL-258-CP-G Connector Shakespeare offers an extensive line of marine grade connectors and adapters for antenna installations. Our new connectors are gold-plated brass to better withstand the elements and to minimize traditional connector-borne signal loss. SHAKESPEARE CENTERPIN and reg; REVOLUTIONIZES THE PL-259 AND PL-258 The perfect solution to the troublesome task of installing a PL-259 connector or splicing RG-58 A/U, RG-8/X or Lo-Max and reg; coaxial cables. Shakespeares revolutionary Centerpin and reg; connectors are solderless, fret-less, and botchless. They go on without a hitch, without soldering skills. No measuring, no critical stripping of coax insulation, no fussing with the coaxs braid, and no and quot;tinning. And quot; PL-258-CP-G is a Centerpin and reg; PL-258 splice connector for RG-8X or RG-58/AU coax.

Shakespeare PL-259-CP-G PL-259 Connector For RG-8X Or RG-58/AU Coax. Gold Plated $9.95 Shakespeare Centerpin and reg; PL-259-CP-G Connector Shakespeare offers an extensive line of marine grade connectors and adapters for antenna installations. Our new connectors are gold-plated brass to better withstand the elements and to minimize traditional connector-borne signal loss. SHAKESPEARE CENTERPIN and reg; REVOLUTIONIZES THE PL-259 AND PL-258 The perfect solution to the troublesome task of installing a PL-259 connector or splicing RG-58 A/U, RG-8/X or Lo-Max and reg; coaxial cables. Shakespeares revolutionary Centerpin and reg; connectors are solderless, fret-less, and botchless. They go on without a hitch, without soldering skills. No measuring, no critical stripping of coax insulation, no fussing with the coaxs braid, and no and quot;tinning. And quot; PL-259-CP-G is a Centerpin and reg; PL-259 connector for RG-8X or RG-58/AU coax. Gold plated.

Truckspec TSPL259 Pl259 Male Coax Connector $19.08 Deluxe PL259 with Gold Tip Bakelite Insulator. Male PL259 Connector. Huge selection to choose from. Ready to ship at your convenience. High quality components.

Universal Battery Connector $8.99 Universal Battery Connector; Tap/Ground Kit; Side Post; Incl. Spade Terminal Tabs/16-22 Gauge Female Terminals;

HX-2200CD-T 2200 Ni-Cd Battery - 7.2V with Tamiya Connector $20.68 Battery Tamiya Connector